Product Manual

Control Functions

The information below briefly describes the function of individual controls. Starting, stopping, driving, and

mowing require the combined use of several controls applied in specific sequences. To learn what combination

and sequence of controls to use for various tasks see the OPERATION section.

Ignition Switch

The ignition switch starts and stops the engine, it has

three positions:

OFF Stops the engine and shuts off the

electrical system.

RUN Allows the engine to run and powers

the electrical system.

START Cranks the engine for starting

NOTE: Never leave the ignition switch in the RUN

position with the engine stopped-this drains the

battery.

Please take a moment and

familiarize yourself with

the name, location, and

function of these controls

so that you will better

understand the safety and

operating instructions

provided in this manual.

Hydraulic Release Rod

The hydraulic release rod deactivates the

transmission so that the unit can be pushed by hand.

See Pushing the Mower By Hand for operation

information.

Fuel Tank Cap

To remove the cap, turn counterclockwise.

Parking Brake

DISENGAGE Releases the parking brake.

ENGAGE Locks the parking brake.

Pull the parking brake lever back to engage the

parking brake. Move the lever fully forward to

disengage the parking brake. NOTE: To start the

unit the parking brake must be engaged.

PTO (Power Take Off) Switch

The PTO switch engages and disengages the

mower. Pull UP on the switch to engage, and push

DOWN to disengage.

FEATURES & CONTROLS

Features & Controls

Not for

Reproduction