(The chances are you’re never going to read me) Owner’s Manual model SCE www.simplicityvac.
Contents IMPORTANT SAFETY INSTRUCTIONS Grounding instructions Description of the extractor Before using your extractor for the first time 2 3 4 5 Operation While operating the machine Cleaning with accessory tools Draining the recovery tank Draining the solution tank 6 7 8 8 Maintenance and Care Filter maintenance Extractor maintenance 8 9 Problem Solving Guide Troubleshooting Helpful hints 10 11 Owner’s Information 12 Warranty 13
IMPORTANT SAFETY INSTRUCTIONS This machine is intended for household use. It is designed to clean carpet and upholstery in an indoor environment and is not constructed for any other use. Use only recommended cleaning solutions and accessory tools. All operators must read, understand and practice the following safety precautions.
Grounding Instructions This carpet extractor must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This carpet extractor is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Description of the Extractor 5 6 4 7 13 13 13 8 1 2 3 9 10 14 12 11 7 Recovery tank cover 8 Recovery tank 9 Solution tank 1 Main on / off power switch 2 Pump reset button 10 Accessory hose coupler 3 Brush reset button 11 Accessory hose port 4 Power cord hooks 12 Nozzle 5 Solution button 13 Folding handle lock knob 6 Folding handle 14 Solution tank drain hose 4
Before Using Your Extractor for the First Time • The machine is shipped fully assembled and is ready for use. • Adjust handle from transport position. To adjust, while standing behind the machine lift handle to desirable operating height. Turn right knob forward while turning left knob backward to tighten handle in operating position (fig 1). • Hinge open cover and remove recovery tank from machine. Make sure the float shut-off Figure 1 screen and filter are in place before use.
Operation For Safety: Do not operate machine unless operator manual is read and understood. • Vacuum carpet thoroughly and remove other debris. • Turn main power switch on. • To begin cleaning carpets, push button on handle with thumbs and slowly pull machine backward (fig 1). Figure 1 • Release handle button at end of path and continue to pull machine backward to pick up excess solution. • Tip machine back on wheels and push machine forward to begin next path.
Attachment Cleaning • Connect accessory hose to hose coupler (fig 1) and hose port (fig 2) located at front of machine. • Connect accessory tool to coupler and hose cuff on the other end of the hose (fig 3). • Turn main power switch on. • To clean stairs or upholstery, squeeze trigger Figure 1 on accessory tool to release solution. Release trigger and continue to pull tool over surface to pick up excess solution.
Maintenance Draining Tanks For Safety: When servicing machine, unplug cord from wall outlet. Draining recovery tank • Turn machine off and unplug power cord. • Hinge open cover, lift recovery tank out and empty. Figure 1 Note: Make sure to rinse out recovery tank after each use. Do not use this tank to fill machine with cleaning solution. Draining solution tank • Remove solution tank drain hose at rear of machine and empty remaining solution (fig 1). Figure 2 • Replace drain hose (fig 2).
Maintenance For Safety: When servicing machine, unplug cord from wall outlet. Regular Maintenance Tips • Empty and rinse out recovery tank thoroughly. • Remove float shut-off screen from hinged cover above the recovery tank cover and clean (fig 1). • Drain remaining water from solution tank (see “Draining Tanks”). Figure 1 • Clean solution tank external filter. (see “Filter Maintenance”). • Remove any entangled carpet fibers and debris from brushes underneath machine (fig 2).
Problem Solving Guide Troubleshooting Please check each item below if you have trouble with the carpet extractor. Unplug the carpet extractor from the power supply before servicing. Problem Machine does not operate Cause Solution Extractor not plugged in. Plug in unit. Main on/off switch not turned to the on position. Turn machine on. Building circuit breaker tripped. Unplug machine from wall outlet. Check and reset circuit breaker in building. Plug in machine and turn on to operate.
Problem Solving Guide Helpful Hints Please check each item below if you have trouble with the carpet extractor. Unplug the carpet extractor from the power supply before servicing. Problem Cause Solution Check to ensure the solution tank drain hose (clear tube) is securely connected. If machine is leaking The drain hose is loose. If you hear a louder, higher-pitched motor noise Solution tank is empty.
Owner’s Information (keep this for your records) The model and serial number of this product may be found on the back of the unit. You should note the model and serial number of your carpet extractor in the spaces provided below, and retain this book as a permanent record of your purchase.
Warranty What is Covered: This warranty covers any defects in material and workmanship in your new Simplicity carpet extractor and applies exclusively to the original purchaser. How Long Coverage Lasts: Warranty coverage for the Simplicity carpet extractor lasts two years. Warranty for the Simplicity extractor tanks lasts ten years. What is Not Covered: • Damage to the extractor which occurs from neglect, abuse, alterations, accident, misuse or improper maintenance.
1-888-9-SIMPLY www.simplicityvac.
