Specifications

MAC 5000

Analog/Digital I/O Module

Overview

Frequently there are applications that have a unique control requirement not

met by standard automation components. For these applications the MAC 5000

DIGANIO module is available. Whether it's a matter of sensing a safety switch,

reading a temperature or controlling a solenoid, this module completes the system.

Ordering Information

73005060 ........................................................ General Purpose Digital/Analog I/O Module

I/O Connection

The female DB-25 pin connector breaks out the I/O connections. Also pres-

ent on the DB-25 are the signal and chassis ground as well as +5, +24vDC. The

DB-15 female connector is for analog I/O support. The BNC connector provides

for a single analog output.

Specications

Analog channels........................................................... 4 or 2 depending on conguration

Analog resolution................................................... 8 bit 4 channel / 16bit 2 channel mode

Analog output .............................................................................................................. 0-10v

Analog input .........................................................................................4 channel / 0-5 VDC

Digital output channels ....................................................................................................... 8

Digital output ..................................................................... Open collector 24v 500mA max

Digital input channels ......................................................................................................... 8

Digital input ............................................................................ TTL level 1k ohm impedance

• General purpose

analog and

digital I/O

• Flexible port

arrangement

• Interfaces to LEP

990034 power

supply