Specifications

clear snmp community
Chapter 8
IP Services Commands
103
Examples To reset the NTP interval to the default value, type the following
command:
PROMPT# clear ntp update-interval
success: change accepted.
See Also
l clear ntp server on page 102
l set ntp on page 127
l set ntp server on page 128
l set ntp update-interval on page 129
l show ntp on page 170
clear snmp community
Clears an SNMP community string.
Syntax clear snmp community name comm-string
Defaults None.
Access Enabled.
Examples The following command clears community string setswitch2:
PROMPT# clear snmp community name setswitch2
success: change accepted.
See Also
l set snmp community on page 130
l show snmp community on page 173
clear snmp notify profile
Clears an SNMP notification profile.
comm-string Name of the SNMP community you want to clear.