Specifications

set snmp notify profile
Chapter 8
IP Services Commands
133
notification-type Name of the notification type:
• APBootTraps—Generated when a UNIVERGE WL
Access Point boots.
• ApNonOperStatusTraps—Generated to indicate a
UNIVERGE WL Access Point radio is
nonoperational.
• ApOperRadioStatusTraps—Generated when the
status of a UNIVERGE WL Access Point radio
changes.
• APTimeoutTraps—Generated when an AP fails to
respond to the UNIVERGE WL Controller.
• AuthenTraps—Generated when the UNIVERGE WL
Controllers SNMP engine receives a bad community
string.
• AutoTuneRadioChannelChangeTraps—Generated
when the RF Auto-Tuning feature changes the channel
on a radio.
• AutoTuneRadioPowerChangeTraps—Generated
when the RF Auto-Tuning feature changes the power
setting on a radio.
• ClientAssociationFailureTraps—Generated when a
client’s attempt to associate with a radio fails.
• ClientAuthorizationSuccessTraps—Generated
when a client is successfully authorized.
• ClientAuthenticationFailureTraps—Generated
when authentication fails for a client.
• ClientAuthorizationFailureTraps—Generated when
authorization fails for a client.
• ClientClearedTraps—Generated when a client’s
session is cleared.
• ClientDeAssociationTraps—Generated when a
client is dissociated from a radio.
• ClientDot1xFailureTraps—Generated when a client
experiences an 802.1X failure.
• ClientRoamingTraps—Generated when a client
roams.
• CounterMeasureStartTraps—Generated when
UNIVERGE WL Control System begins
countermeasures against a rogue access point.