Specifications

set snmp usm
Chapter 8
IP Services Commands
147
usm-username Name of the SNMPv3 user. Specify
between 1 and 32 alphanumeric
characters, with no spaces.
snmp-engine-id {ip ip-addr | local | hex
hex-string}
Specifies a unique identifier for the
SNMP engine.
To send informs, you must specify
the engine ID of the inform receiver.
To send traps and to allow get and set
operations and so on, specify local as
the engine ID.
• hex hex-string—ID is a
hexadecimal string.
• ip ip-addr—ID is based on the IP
address of the station running the
management application. Enter
the IP address of the station.
UNIVERGE WL Control System
calculates the engine ID based on
the address.
• local—Uses the value computed
from the UNIVERGE WL
Controllers system IP address.