Specifications

show dhcp-server
Chapter 8
IP Services Commands
159
See Also set interface dhcp-client on page 112
show dhcp-server
Displays UNIVERGE WL Control System DHCP server information.
Syntax show dhcp-server [interface vlan-id] [verbose]
Defaults None.
Access All.
Examples The following command displays the addresses leased by the
UNIVERGE WL Control System DHCP server:
PROMPT# show dhcp-server
VLAN Name Address MAC Lease Remaining(sec)
---- ------------- -------------- ----------------- --------------------
1 default 10.10.20.2 00:01:02:03:04:05 12345
1 default 10.10.20.3 00:01:03:04:06:07 2103
2 red-vlan 192.168.1.5 00:01:03:04:06:08 102
2 red-vlan 192.168.1.7 00:01:03:04:06:09 16789
The following command displays configuration and status information for each
VLAN on which the DHCP server is configured:
PROMPT# show dhcp-server verbose
Interface: 0 (Direct AP)
DNS Servers DNS server IP address(es) received from the DHCP
server.
DNS Domain Name Default DNS domain name received from the DHCP
server.
interface vlan-id Displays the IP addresses leased by the specified
VLAN.
verbose Displays configuration and status information for the
UNIVERGE WL Control System DHCP server.
Table 14. Output for show dhcp-client
Field Description