Specifications

show interface
Chapter 8
IP Services Commands
162
Syntax show interface [vlan-id]
Defaults If you do not specify a VLAN ID, interfaces for all VLANs are
displayed.
Access All.
Usage The IP interface table flags an address assigned by a DHCP server with an
asterisk ( * ).
Examples The following command displays all the IP interfaces configured on a
UNIVERGE WL Controller:
PROMPT# show interface
VLAN Name Address Mask Enabled State RIB
---- ------------- -------------- --------------- ------- ----- ----
1 default 10.10.10.10 255.255.255.0 YES Up ipv4
2 mauve 10.10.20.10 255.255.255.0 NO Down ipv4
4 corpvlan *10.3.1.110 255.255.255.0 YES Up ipv4
Table 17 describes the fields in this display.
vlan-id VLAN name or number.
Table 17. Output for show interface
Field Description
VLAN VLAN number
Name VLAN name
Address IP address
Mask Subnet mask
Enabled Administrative state:
• YES (enabled)
• NO (disabled)
State Link state:
• Up (operational)
• Down (unavailable)
RIB Routing Information Base