Specifications

show ip https
Chapter 8
IP Services Commands
166
See Also
l clear ip telnet on page 101
l set ip https server on page 119
l set ip telnet on page 125
l set ip telnet server on page 126
l show ip telnet on page 169
Table 20. Output for show ip https
Field Description
HTTPS is
enabled/disabled
State of the HTTPS server:
• Enabled
• Disabled
HTTPS is set to use port TCP port number on which the UNIVERGE WL
Controller listens for HTTPS connections.
Last 10 connections List of the last 10 devices to establish connections to
the UNIVERGE WL Controller HTTPS server.
IP Address IP address of the device that established the
connection.
Note: If a browser connects to a UNIVERGE WL
Controller from behind a proxy, then only the proxy
IP address is shown. If multiple browsers connect
using the same proxy, the proxy address appears only
once in the output.
Last Connected Time when the device established the HTTPS
connection to the UNIVERGE WL Controller.
Time Ago (s) Number of seconds since the device established the
HTTPS connection to the UNIVERGE WL
Controller.