Specifications

show timezone
Chapter 8
IP Services Commands
177
l show timezone on page 177
show timezone
Shows the time offset for the real-time clock from UTC on a UNIVERGE WL
Controller.
Syntax show timezone
Defaults None.
Access All.
Examples To display the offset from UTC, type the following command:
PROMPT# show timezone
Timezone set to 'pst', offset from UTC is -8 hours
See Also
l clear summertime on page 105
l clear timezone on page 107
l set summertime on page 151
l set timedate on page 154
l set timezone on page 155
l show summertime on page 175
l show timedate on page 176
telnet
Opens a Telnet client session with a remote device.
Syntax telnet {ip-addr | hostname} [port port-num]
ip-addr IP address of the remote device.