Specifications

clear accounting
Chapter 9
AAA Commands
185
clear accounting
Removes accounting services for specified wireless users with administrative
access or network access.
Syntax clear accounting {admin | dot1x | system} {user-glob}
Defaults None.
Access Enabled.
Examples The following command removes accounting services for authorized
network user Nin:
PROMPT# clear accounting dot1x Nin
success: change accepted.
See Also
l set accounting {admin | console} on page 200
admin Users with administrative access to the UNIVERGE WL
Controller through a console connection or through a Telnet
or WebView connection.
dot1x Users with network access through theUNIVERGE WL
Controller. Users with network access are authorized to use
the network through either an IEEE 802.1X method or their
media access control (MAC) address.
system Disables sending of Accounting-On and Accounting-Off
messages to a RADIUS server, if previously enabled.
When this command is entered, an Accounting-Off message
is generated and sent to the server or server group specified
with the set accounting system command.
user-glob Single user or set of users with administrative access or
network access.
Specify a username, use the double-asterisk wildcard
character (**) to specify all usernames, or use the
single-asterisk wildcard character (*) to specify a set of
usernames up to or following the first delimiter character—
either an at sign (@) or a period (.). (For details, see “User
Globs” on page 9.)