Specifications

Understanding Command Descriptions
Chapter 2
Using the Command-Line Interface
15
dns show DNS status
https show ip https
route Show ip route table
telnet show ip telnet
To determine the port on which Telnet is running, type the following command:
PROMPT# show ip telnet
Server Status Port
--------------------------
Enabled 23
Understanding Command Descriptions
Each command description in the WL Command Reference contains the following
elements:
l A command name, which shows the keywords but not the variables. For
example, the following command name appears at the top of a command
description and in the index:
set ap name
l A brief description of how the command functions.
l The full command syntax.
l Any command defaults.
l The command access, which is either enabled or all. All indicates that anyone
can access this command. Enabled indicates that you must enter the enable
password before entering the command.
l The command history, which identifies the UNIVERGE WL Control System
version in which the command was introduced and the version numbers of
any subsequent updates.
l Special tips for command usage. These are omitted if the command requires
no special usage.
l One or more examples of the command in context, with the appropriate
system prompt and response.
l One or more related commands.