Specifications

set authentication admin
Chapter 9
AAA Commands
203
Defaults Accounting is disabled for all users by default.
Access Enabled.
Usage For network users with start-stop accounting profiles whose records are
sent to a RADIUS server, UNIVERGE WL Control System sends interim updates
to the RADIUS server when the user roams.
Examples The following command issues stop-only records to the RADIUS
server group sg2 for network user Nin, who is authenticated by 802.1X:
PROMPT# set accounting dot1x Nin stop-only sg2
success: change accepted.
See Also
l clear accounting on page 185
l show accounting statistics on page 243
set authentication admin
Configures authentication and defines where it is performed for specified users
with administrative access through Telnet or Web View.
stop-only Sends accounting records only at the end of a network
session.
method1
method2
method3
method4
At least one of up to four methods that UNIVERGE WL
Control System uses to process accounting records. Specify
one or more of the following methods in priority order. If
the first method does not succeed, UNIVERGE WL Control
System tries the second method, and so on.
A method can be one of the following:
• local—Stores accounting records in the local database
on the UNIVERGE WL Controller. When the local
accounting storage space is full, UNIVERGE WL
Control System overwrites older records with new ones.
• server-group-name—Stores accounting records on one
or more Remote Authentication Dial-In User Service
(RADIUS) servers. You can also enter the names of
existing RADIUS server groups as methods.