Specifications

set authentication dot1x
Chapter 9
AAA Commands
209
set authentication dot1x
Configures authentication and defines how it is performed for specified wireless
authentication clients who use an IEEE 802.1X authentication protocol to access
the network through the UNIVERGE WL Controller.
Syntax set authentication dot1x {ssid ssid-name} user-glob [bonded] protocol
method1 [method2] [method3] [method4]
ssid
ssid-name
SSID name to which this authentication rule applies. To apply the
rule to all SSIDs, type any.
user-glob A single user or a set of users with 802.1X network access.
Specify a username, use the double-asterisk wildcard character
(**) to specify all usernames, or use the single-asterisk wildcard
character (*) to specify a set of usernames up to or following the
first delimiter character—either an at sign (@) or a period (.).
(For details, see “User Globs” on page 9.)
bonded Enables Bonded Auth™ (bonded authentication). When this
feature is enabled, UNIVERGE WL Control System
authenticates the user only if the computer that the user is on has
already been authenticated.