Specifications

set mac-user attr
Chapter 9
AAA Commands
223
Table 25. Authentication Attributes for Local Users
Attribute Description Valid Value(s)
encryption-type Type of encryption
required for access by
the client. Clients who
attempt to use an
unauthorized
encryption method are
rejected.
Note: Encryption-Type
is a UNIVERGE WL
Control System
vendor-specific
attribute (VSA). The
vendor ID is 14525, and
the vendor type is 3.
One of the following numbers that identifies
an encryption algorithm:
• 1—AES_CCM (Advanced Encryption
Standard using Counter with CBC-MAC)
• 2—Reserved
• 4—TKIP (Temporal Key Integrity
Protocol)
• 8—WEP_104 (the default)
(Wired-Equivalent Privacy protocol
using 104 bits of key strength)
• 16—WEP_40 (Wired-Equivalent Privacy
protocol using 40 bits of key strength)
• 32—NONE (no encryption)
• 64—Static WEP
In addition to these values, you can specify a
sum of them for a combination of allowed
encryption types. For example, to specify
WEP_104 and WEP_40, use 24.
end-date Date and time after
which the user is no
longer allowed to be on
the network.
Date and time, in the following format:
YY/MM/DD-HH:MM
You can use end-date alone or with
start-date. You also can use start-date,
end-date, or both in conjunction with
time-of-day.