Specifications

set mac-user attr
Chapter 9
AAA Commands
229
Examples The following command assigns input access control list (ACL) acl-03
to filter packets from a user at MAC address 01:02:03:04:05:06:
PROMPT# set mac-user 01:02:03:04:05:06 attr filter-id acl-03.in
success: change accepted.
vlan-name
(network access
mode only)
Virtual LAN (VLAN)
assignment.
Note: VLAN-Name is a
UNIVERGE WL
Control System
vendor-specific
attribute (VSA). The
vendor ID is 14525, and
the vendor type is 1.
Note: On some
RADIUS servers, you
might need to use the
standard RADIUS
attribute
Tunnel-Pvt-Group-ID,
instead of
VLAN-Name.
Name of a VLAN that you want the user to
use. The VLAN must be configured on a
UNIVERGE WL Controller within the
Mobility Domain to which this UNIVERGE
WL Controller belongs.
acct-interim-int
erval
Interval in seconds
between accounting
updates, if start-stop
accounting mode is
enabled.
Number between 180 and 3,600 seconds, or
0 to disable periodic accounting updates.
The UNIVERGE WL Controller ignores the
acct-interim-interval value and issues a log
message if the value is below 60 seconds.
Note: If both a RADIUS server and the
UNIVERGE WL Controller supply a value
for the acct-interim-interval attribute, then
the value from the UNIVERGE WL
Controller takes precedence.
Table 25. Authentication Attributes for Local Users
Attribute Description Valid Value(s)