Specifications

clear mobility-domain
Chapter 10
Mobility Domain Commands
250
clear mobility-domain
Clears all Mobility Domain configuration and information from a UNIVERGE
WL Controller, regardless of whether the UNIVERGE WL Controller is a seed or
a member of a Mobility Domain.
Syntax clear mobility-domain
Defaults None.
Access Enabled.
Usage This command has no effect if the UNIVERGE WL Controller is not
configured as part of a Mobility Domain.
Examples To clear a Mobility Domain from a UNIVERGE WL Controller within
the domain, type the following command:
Controller# clear mobility-domain
success: change accepted.
See Also
l clear mobility-domain member on page 250
l set mobility-domain member on page 251
l set mobility-domain mode member seed-ip on page 252
l set mobility-domain mode seed domain-name on page 253
clear mobility-domain member
On the seed, the command removes the identified member from the Mobility
Domain.
Syntax clear mobility-domain member ip-addr
Defaults None.
ip-addr IP address of the Mobility Domain member, in dotted
decimal notation.