Specifications

Network Domain Commands

257

Network Domain Commands

Use Network Domain commands to configure and manage Network Domain

groups.

A Network Domain is a group of geographically dispersed Mobility Domains that

share information over a WAN link. This shared information allows a user

configured on a UNIVERGE WL Controller in one Mobility Domain to establish

connectivity with a UNIVERGE WL Controller in another Mobility Domain in

the same Network Domain. The UNIVERGE WL Controller forwards the user

traffic by creating a VLAN tunnel to a UNIVERGE WL Controller in the remote

Mobility Domain.

In a Network Domain, one or more UNIVERGE WL Controllers serve as a seed

UNIVERGE WL Controller. At least one of the Network Domain seeds maintains

a connection with each of the member UNIVERGE WL Controllers in the

Network Domain. The Network Domain seeds share information about the

VLANs configured on their members, so that all the Network Domain seeds have

a common database of VLAN information.

This chapter presents Network Domain commands alphabetically. Use the

following table to locate commands in this chapter based on their use.

Network Domain set network-domain mode seed domain-name on page 263

set network-domain mode member seed-ip on page 261

set network-domain peer on page 262

show network-domain on page 263

clear network-domain on page 258

clear network-domain mode on page 258

clear network-domain peer on page 259

clear network-domain seed-ip on page 260