Specifications

set radio-profile mode
Chapter 12
AP Commands
316
min-client-rate: 11.0 Mb/s
effective bandwidth: 6000 Kb/s
See Also
l set radio-profile max-voip-bw on page 313
l set service-profile cac-mode on page 341
l show radio-profile on page 408
set radio-profile mode
Creates a new radio profile, and disables or reenables all AP radios that are using
a specific profile.
Syntax set radio-profile name [mode {enable | disable}]
Defaults Each radio profile that you create has a set of properties with factory
default values that you can change with the other set radio-profile commands in
this chapter. Table 33 lists the parameters controlled by a radio profile and their
default values.
Note. For information about the output, see Table 32 on page 314. The
output fields are the same as those for the set radio-profile max-voip-bw
command.
radio-profile
name
Radio profile name of up to 16 alphanumeric characters,
with no spaces.
Use this command without the mode enable or mode
disable option to create a new profile.
mode enable Enables the radios that use this profile.
mode disable Disables the radios that use this profile.