Specifications

set radio-profile mode
Chapter 12
AP Commands
318
max-voip-bw 3000 Reserves an aggregate of 3000
Kbps on each radio for NEC
VoIP sessions.
Note: This parameter applies
only when the QoS mode is
voice-extension.
max-voip-sessions Not
configured
This parameter is equivalent to
max-voip-bw and is never saved
in the configuration. Instead,
UNIVERGE WL Control
System converts it into
max-voip-bw before saving the
configuration.
preamble-length short Advertises support for short
802.11b preambles, accepts
either short or long 802.11b
preambles, and generates unicast
frames with the preamble length
specified by the client.
Note: This parameter applies
only to 802.11b/g radios.
qos-mode wmm Classifies and marks traffic
based on 802.1p and DSCP, and
optimizes forwarding
prioritization of AP radios for
Wi-Fi Multimedia (WMM).
rfid-mode disable Radio does not function as a
location receiver in an
AeroScout Visibility System.
Table 33. Defaults for Radio Profile Parameters
Parameter
Default
Value
Radio Behavior When
Parameter Set To Default
Value