Specifications

set radio-profile service-profile
Chapter 12
AP Commands
325
Defaults A radio profile does not have a service profile associated with it by
default. In this case, the radios in the radio profile use the default settings for
parameters controlled by the service profile. Table 34 lists the parameters
controlled by a service profile and their default values.
Table 34. Defaults for Service Profile Parameters
Parameter Default Value
Radio Behavior When
Parameter Set To Default
Value
active-call-idle-timeout 120 Releases the bandwidth
reserved for an active NEC
voice session (on-hook call), if
the session remains idle for
120 seconds.
attr No attributes
configured
Does not assign the SSID’s
authorization attribute values
to SSID users, even if
attributes are not otherwise
assigned.
auth-dot1x enable When the Wi-Fi Protected
Access (WPA) information
element (IE) is enabled, uses
802.1X to authenticate WPA
clients.
auth-fallthru none Denies access to users who do
not match an 802.1X or MAC
authentication rule for the
SSID requested by the user.
auth-psk disable Does not support using a
preshared key (PSK) to
authenticate WPA clients.
beacon enable Sends beacons to advertise the
SSID managed by the service
profile.