Specifications

set service-profile attr
Chapter 12
AP Commands
334
Usage The active-call idle timeout applies only to active voice sessions (on-hook
calls) on an SSID whose service profile has CAC mode voice-extension and
whose radio profile has QoS mode voice-extension. For all other sessions, the
user idle timeout applies instead. The user idle timeout also applies to sessions
whose active-call idle timeout has expired.
Examples The following command increases the active-call idle timeout to 180
seconds (3 minutes) in service profile sp1:
PROPMT# set service-profile sp1 active-call-idle-timeout 180
success: change accepted.
See Also
l set service-profile user-idle-timeout on page 365
l set service-profile web-portal-session-timeout on page 368
l show service-profile on page 413
set service-profile attr
Configures authorization attributes that are applied by default to users accessing
the SSID managed by the service profile. These SSID default attributes are
applied in addition to any supplied by the RADIUS server or from the local
database.
Syntax set service-profile name attr attribute-name value
Defaults By default, a service profile does not have any authorization attributes
set.
name Service profile name.
attribute-name value Name and value of an attribute you are using to
authorize SSID users for a particular service or
session characteristic.
For a list of authorization attributes and values that
you can assign to network users, see Table 25 on
page 223. All of the attributes listed in Table 25 can
be used with this command except ssid.