Specifications

set service-profile auth-dot1x
Chapter 12
AP Commands
336
The following command limits the days and times when users accessing the SSID
managed by service profile sp2 can access the network, to 5 p.m. to 2 a.m. every
weekday, and all day Saturday and Sunday:
PROPMT# set service-prof sp2 attr time-of-day Wk1700-0200,Sa,Su
success: change accepted.
See Also
l show service-profile on page 413
l show sessions network on page 536
set service-profile auth-dot1x
Disables or reenables 802.1X authentication of Wi-Fi Protected Access (WPA)
clients by UNIVERGE WL Access Points radios, when the WPA information
element (IE) is enabled in the service profile that is mapped to the radio profile
that the radios are using.
Syntax set service-profile name auth-dot1x {enable | disable}
Defaults When the WPA IE is enabled, 802.1X authentication of WPA clients is
enabled by default. If the WPA IE is disabled, the auth-dot1x setting has no
effect.
Access Enabled.
Usage This command does not disable dynamic WEP for non-WPA clients. To
disable dynamic WEP for non-WPA clients, enable the WPA IE (if not already
enabled) and disable the 40-bit WEP and 104-bit WEP cipher suites in the
WPA IE, if they are not already disabled.
To use 802.1X authentication for WPA clients, you also must enable the WPA IE.
name Service profile name.
enable Enables 802.1X authentication of WPA clients.
disable Disables 802.1X authentication of WPA clients.