Specifications

set service-profile auth-fallthru
Chapter 12
AP Commands
338
Defaults The default fallthru authentication type is none.
If a username does not match a userglob in an authentication rule for the SSID
requested by the user, the UNIVERGE WL Controller that is managing the radio
the user is connected to redirects the user to a web page located on the
UNIVERGE WL Controller. The user must type a valid username and password
on the web page to access the SSID.
Access Enabled.
Usage The last-resort fallthru authentication type allows any user to access any
SSID managed by the service profile. This method does not require the user to
provide a username or password. Use the last-resort method only if none of the
SSIDs managed by the service profile require secure access.
The web-portal authentication type also requires additional configuration items.
(See the “Configuring AAA for Network Users” chapter of the Configuration
Guide.)
last-resort Automatically authenticates the user and allows access to
the SSID requested by the user, without requiring a
username and password.
none Denies authentication and prohibits the user from accessing
the SSID.
Note: The fallthru authentication type none is different
from the authentication method none you can specify for
administrative access. The fallthru authentication type none
denies access to a network user. In contrast, the
authentication method none allows access to the
UNIVERGE WL Controller by an administrator. (See “set
authentication admin” on page 203 and “set authentication
console” on page 206.)
web-portal Serves the user a web page from the UNIVERGE WL
Controllers nonvolatile storage for secure login to the
network.