Specifications

set service-profile cipher-wep104
Chapter 12
AP Commands
344
Syntax set service-profile name cipher-tkip {enable | disable}
Defaults When the WPA IE is enabled, TKIP encryption is enabled by default.
Access Enabled.
Usage To use TKIP, you must also enable the WPA IE.
Examples The following command disables TKIP encryption in service profile
sp2:
PROPMT# set service-profile sp2 cipher-tkip disable
success: change accepted.
See Also
l set service-profile cipher-ccmp on page 343
l set service-profile cipher-wep104 on page 344
l set service-profile cipher-wep40 on page 346
l set service-profile tkip-mc-time on page 361
l set service-profile wpa-ie on page 372
l show service-profile on page 413
set service-profile cipher-wep104
Enables dynamic Wired Equivalent Privacy (WEP) with 104-bit keys, in a service
profile.
Syntax set service-profile name cipher-wep104 {enable | disable}
name Service profile name.
enable Enables TKIP encryption for WPA clients.
disable Disables TKIP encryption for WPA clients.
name Service profile name.