Specifications

set service-profile cipher-wep104

Chapter 12

AP Commands

345

Defaults

104-bit WEP encryption is disabled by default.

Access

Enabled.

Usage

To use 104-bit WEP with WPA clients, you must also enable the WPA IE.

When 104-bit WEP in WPA is enabled in the service profile, radios managed by a

radio profile that is mapped to the service profile can also support non-WPA

clients that use dynamic WEP.

To support WPA clients that use 40-bit dynamic WEP, you must enable WEP

with 40-bit keys. Use the set service-profile cipher-wep40 command.

Microsoft Windows XP does not support WEP with WPA. To configure a service

profile to provide dynamic WEP for XP clients, leave WPA disabled and use the

set service-profile wep commands.

To support non-WPA clients that use static WEP, you must configure static WEP

keys. Use the set service-profile wep key-index command.

Examples

The following command configures service profile sp2 to use 104-bit

WEP encryption:

PROPMT# set service-profile sp2 cipher-wep104 enable

success: change accepted.