Specifications

set service-profile keep-initial-vlan

Chapter 12

AP Commands

350

set service-profile keep-initial-vlan

Configures UNIVERGE WL Access Point radios managed by the radio profile to

leave a roamed user on the VLAN assigned by the UNIVERGE WL Controller

where the user logged on. When this option is disabled, a users VLAN is

reassigned by each UNIVERGE WL Controller when a user roams.

Syntax

set service-profile name keep-initial-vlan {enable | disable}

Defaults

This option is disabled by default. Be sure to set as enable.

Access

Enabled.

Usage

Even when this option is enabled, the UNIVERGE WL Controller to

which a user roams (the roamed-to switch) can reassign the VLAN in any of the

following cases:

l A location policy on the local switch reassigns the VLAN.

l The user is configured in the switch’s local database and the VLAN-Name

attribute is set on the user or on a user group the user is in.

l The access rule on the roamed-to switch uses RADIUS, and the VLAN-Name

attribute is set on the RADIUS server.

Examples

The following command enables the keep-initial-vlan option on

service profile sp3:

PROPMT# set service-profile sp3 keep-initial-vlan enable

success: change accepted.