Specifications

set service-profile short-retry-count
Chapter 12
AP Commands
358
See Also
l set radio-profile mode on page 316
l set service-profile cipher-tkip on page 343
l show service-profile on page 413
set service-profile short-retry-count
Changes the short retry threshold for a service profile. The short retry threshold
specifies the number of times a radio can send a short unicast frame without
receiving an acknowledgment. A short unicast frame is a frame that is shorter than
the frag-threshold.
Syntax set service-profile name short-retry-count threshold
Defaults The default short unicast retry threshold is 5 attempts.
Access Enabled.
Examples The following command changes the short retry threshold for service
profile sp1 to 3:
PROPMT# set service-profile sp1 short-retry-count 3
success: change accepted.
See Also
l set radio-profile frag-threshold on page 310
l set service-profile long-retry-count on page 351
l show service-profile on page 413
name Service profile name.
threshold Number of times a radio can send the same short unicast
frame. You can enter a value from 1 through 15.