Specifications

set service-profile transmit-rates
Chapter 12
AP Commands
362
Syntax set service-profile name tkip-mc-time wait-time
Defaults The default countermeasures wait time is 60,000 ms (60 seconds).
Access Enabled.
Usage Countermeasures apply only to TKIP and WEP clients. This includes
WPA WEP clients and non-WPA WEP clients. CCMP clients are not affected.
The TKIP cipher suite must be enabled. The WPA IE also must be enabled.
Examples The following command changes the countermeasures wait time for
service profile sp3 to 30,000 ms (30 seconds):
PROPMT# set service-profile sp3 tkip-mc-time 30000
success: change accepted.
See Also
l set service-profile cipher-tkip on page 343
l set service-profile wpa-ie on page 372
l show service-profile on page 413
set service-profile transmit-rates
Changes the data rates supported by UNIVERGE WL Access Points radios for a
service-profile SSID.
Syntax set service-profile name transmit-rates {11a | 11b | 11g}
mandatory rate-list [disabled rate-list] [beacon-rate rate] [multicast-rate {rate
| auto}]
name Service profile name.
wait-time Number of milliseconds (ms) countermeasures remain in
effect. You can specify from 0 to 60,000.
name Service profile name.
11a | 11b | 11g Radio type.