Specifications

show ap counters
Chapter 12
AP Commands
382
MultiBytDrop Number of multicast bytes dropped by the radio due
to a buffer overflow on the UNIVERGE WL Access
Points. (See the description for MultiPktDrop.)
User Sessions Number of clients currently associated with the
radio.
Generally, this counter is equal to the number of
sessions listed for the radio in show sessions output.
However, the counter can differ from the counter in
show sessions output if a client is associated with the
radio but has not yet completed 802.1X
authentication. In this case, the client is counted by
this counter but not in the show sessions output.
Although there is no specific normal range for this
counter, a high or low number relative to other radios
can mean the radio is underutilized or overutilized
relative to the other radios. (However, if the clients
are VoIP phones, a relatively high number of clients
does not necessarily mean overutilization since voice
clients consume less bandwidth on average than data
clients.)
MIC Error Ct Number of times the radio received a
TKIP-encrypted frame with an invalid MIC.
Normally, the value of this counter should always be
0. If the value is not 0, check the system log for MIC
error messages and contact UNIVERGE.
TKIP Decrypt Err Number of times a decryption error occurred with a
packet encrypted with TKIP.
(See the description for CCMP Pkt Decrypt Err.)
CCMP Pkt Replays Number of CCMP packets that were resent to the
UNIVERGE WL Access Points by a client.
(See the description for TKIP Pkt Replays.)
RadioResets Number of times the radio has been reset. Generally,
a reset occurs as a result of RF noise. It is normal for
this counter to increment a few times per day.
Table 36. Output for show ap counters
Field Description