Specifications

show radio-profile
Chapter 12
AP Commands
410
Max Rx Lifetime Number of milliseconds that a frame scheduled to be
transmitted by a radio in the radio profile can remain
in buffer memory.
RTS Threshold Minimum length (in bytes) a frame can be for a radio
in the radio profile to use the RTS/CTS method to
send the frame. The RTS/CTS method clears the air
of other traffic to avoid corruption of the frame due
to a collision with another frame.
Frag Threshold Maximum length (in bytes) a frame is allowed to be
without being fragmented into multiple frames
before transmission by a radio in the radio profile.
Long Preamble Indicates whether an 802.11b radio that uses this
radio profile advertises support for frames with long
preambles only:
• YES—Advertises support for long preambles
only.
• NO—Advertises support for long and short
preambles.
Tune Channel Indicates whether RF Auto-Tuning is enabled for
dynamically setting and tuning channels.
Tune Power Indicates whether RF Auto-Tuning is enabled for
dynamically setting and tuning power levels.
Tune Channel Interval Interval, in seconds, at which RF Auto-Tuning
decides whether to change the channels on radios in a
radio profile. At the end of each interval,
UNIVERGE WL Control System processes the
results of the RF scans performed during the
previous interval, and changes radio channels if
needed.
Table 48. Output for show radio-profile
Field Description