Specifications

set igmp oqi

Chapter 13

IGMP Snooping Commands

432

See Also

set igmp mrsol on page 430

set igmp oqi

Changes the IGMP other-querier-present interval timer on one VLAN or all

VLANs on a UNIVERGE WL Controller.

Syntax

set igmp oqi seconds [vlan vlan-id]

Defaults

The default other-querier-present interval is 255 seconds

(4.25 minutes).

Access

Enabled.

Usage

A UNIVERGE WL Controller cannot become the querier unless the

pseudo-querier feature is enabled on the UNIVERGE WL Controller. When the

feature is enabled, the UNIVERGE WL Controller becomes the querier for a

subnet so long as the UNIVERGE WL Controller does not receive a query

message from a router with a lower IP address than the IP address of the

UNIVERGE WL Controller in that subnet. To enable the pseudo-querier feature,

use set igmp querier.

Examples

The following command changes the other-querier-present interval on

VLAN orange to 200 seconds:

PROMT# set igmp oqi 200 vlan orange

success: change accepted.