Specifications

show system
Chapter 4
System Services Commands
40
The overall field shows the CPU load as a percentage from the time the
UNIVERGE WL Controller was booted. The delta field shows CPU load as a
percentage from the last time the show load command was entered.
See Also show system on page 40
show system
Displays system information.
Syntax show system
Defaults None.
Access Enabled.
Examples To show system information, type the following command:
PROMPT# show system
======================================================================================
Product Name: WL5100
System Name: WL-bldg3
System Country Code: US
System Location: first-floor-bldg3
System Contact: [e-mail]
System IP Address: 192.168.12.7
System Idle Timeout [s]: 1800
System MAC: 00:30:13:63:DD:3C
Hardware Key: 133303330164D01D220058D41CAK
======================================================================================
Boot Time: 2006-09-16 03:06:04
Uptime: 4 days 15:51:55
======================================================================================
Fan Status: Fan OK.
Temperature: Temp1 OK Temp2 OK.
PSU Status: Left Power Supply AC OK DC OK Right Power Supply AC OK DC OK.
Memory [MB]: 351.09/1003.01 (35%)
======================================================================================
Table 2 describes the fields of show system output.