Specifications

show system
Chapter 4
System Services Commands
43
See Also
l clear system on page 23
l set system contact on page 32
l set system countrycode on page 33
l set system idle-timeout on page 35
l set system ip-address on page 36
l set system location on page 37
l set system name on page 38
WL5100
PSU Status
Status of the Left and Right power supply units in the WL5100:
• missing—Power supply is not installed or is inoperable.
• DC ok—Power supply is producing DC power.
• DC output failure—Power supply is not producing DC power.
UNIVERGE WL Control System sends an alert to the system
log every 5 minutes until this condition is corrected.
• AC ok—Power supply is receiving AC power.
• AC not present—Power supply is not receiving AC power.
Memory Current size (in megabytes) of nonvolatile memory (NVRAM)
and synchronous dynamic RAM (SDRAM), plus the percentage
of total memory space in use, in the following format:
NVRAM size /SDRAM size (percent of total)
Table 2. show system Output
Field Description