Specifications

set radius
Chapter 16
RADIUS and Server Groups Commands
505
Defaults Global RADIUS parameters have the following default values:
l deadtime—0 (zero) minutes (The UNIVERGE WL Controller does not
designate unresponsive RADIUS servers as unavailable.)
l encrypted-key—No key
l key—No key
l retransmit—3 (the total number of attempts, including the first attempt)
l timeout—5 seconds
Access Enabled.
Usage You can specify only one parameter per command line.
Examples The following commands sets the dead time to 5 minutes, the RADIUS
key to goody, the number of retransmissions to 1, and the timeout to 21 seconds
on all RADIUS servers connected to the UNIVERGE WL Controller:
Controller# set radius deadtime 5
success: change accepted.
Controller# set radius key goody
success: change accepted.
Controller# set radius retransmit 1
success: change accepted.
Controller# set radius timeout 21
success: change accepted.
See Also
l clear radius server on page 502
l set radius server on page 506
l show aaa on page 240
retransmit number Number of transmission attempts the UNIVERGE
WL Controller makes before declaring an
unresponsive RADIUS server unavailable. You can
specify from 1 to 100 retries.
timeout seconds Number of seconds the UNIVERGE WL Controller
waits for the RADIUS server to respond before
retransmitting. You can specify from 1 to 65,535.