Specifications

clear dot1x reauth-max
Chapter 17
802.1X Management Commands
516
clear dot1x reauth-max
Resets the maximum number of reauthorization attempts to the default setting.
Syntax clear dot1x reauth-max
Defaults The default is 2 attempts.
Access Enabled.
Examples Type the following command to reset the maximum number of
reauthorization attempts to the default:
PROMPT# clear dot1x reauth-max
success: change accepted.
See Also
l set dot1x reauth-max on page 522
l show dot1x on page 526
clear dot1x reauth-period
Resets the time period that must elapse before a reauthentication attempt, to the
default time period.
Syntax clear dot1x reauth-period
Defaults The default is 3600 seconds (1 hour).
Access Enabled.
Examples Type the following command to reset the default reauthentication time
period:
PROMPT# clear dot1x reauth-period
success: change accepted.
See Also
l set dot1x reauth-period on page 522
l show dot1x on page 526