Specifications

set dot1x reauth
Chapter 17
802.1X Management Commands
521
Syntax set dot1x quiet-period seconds
Defaults The default is 60 seconds.
Access Enabled.
Examples Type the following command to set the quiet period to 90 seconds:
PROMPT# set dot1x quiet-period 90
success: dot1x quiet period set to 90.
See Also
l clear dot1x quiet-period on page 515
l show dot1x on page 526
set dot1x reauth
Determines whether the UNIVERGE WL Controller allows the reauthentication
of supplicants (clients).
Syntax set dot1x reauth {enable | disable}
Defaults Reauthentication is enabled by default.
Access Enabled.
Examples Type the following command to enable reauthentication of supplicants
(clients):
PROMPT# set dot1x reauth enable
success: dot1x reauthentication enabled.
See Also
l set dot1x reauth-max on page 522
l set dot1x reauth-period on page 522
seconds Specify a value between 0 and 65,535.
enable Permits reauthentication.
disable Denies reauthentication.