Specifications

show sessions network
Chapter 18
Session Management Commands
538
Usage UNIVERGE WL Control System displays information about network
sessions in three types of displays. See the following tables for field descriptions.
Authorization attribute values can be changed during authorization. If the values
are changed, show sessions output shows the values that are actually in effect
following any changes.
Examples To display summary information for all network sessions, type show
sessions network. For example:
PROMPT> show sessions network
User Sess IP or MAC VLAN Port/
Name ID Address Name Radio
------------------------------ ---- ----------------- --------------- -----
EXAMPLE\Natasha 4* 10.10.40.17 vlan-eng ap 3/1
host/laptop11.exmpl.com 6* 10.10.40.16 vlan-eng ap 3/2
[e-mail] 539* 10.10.40.17 vlan-eng ap 1/1
EXAMPLE\hosni 302* 10.10.40.10 vlan-eng ap 3/1
563 00:0b:be:15:46:56 (none) 1/2
[e-mail] 380* 10.30.40.8 vlan-eng ap 1/1
00:30:65:16:8d:69 443* 10.10.40.19 vlan-wep ap 3/1
EXAMPLE\Geetha 459* 10.10.40.18 vlan-eng ap 3/2
8 sessions total
The following command displays summary information about the sessions for
MAC address
00:60:b9:7e:98:1a:
PROMPT> show sessions network mac-addr 00:60:b9:7e:98:1a
User Sess IP or MAC VLAN Port/
Name ID Address Name Radio
--------------------------- ---- --------------- ------------ -----
EXAMPLE\Havel 13* 10.10.10.40 vlan-eng ap 1/2
The following command displays summary information about all the sessions of
users whose names begin with E:
PROMPT> show sessions network user E*
User Sess IP or MAC VLAN Port/
Name ID Address Name Radio
--------------------------- ---- --------------- ------------ -----
EXAMPLE\Singh 12* 10.10.10.30 vlan-eng ap 3/2
Summary display See Table 64 on page 540.
Verbose display See Table 65 on page 541.
show sessions network session-id display See Table 66 on page 543.