Specifications

show sessions network
Chapter 18
Session Management Commands
543
Vlan-Name
(and other
attributes if
set)
Authorization attributes for the user and how they were assigned (the
sources of the attribute values).
For Vlan-Name, the source of the attribute value can be one of the
following:
• AAA––VLAN is from RADIUS or the local database.
• initial-assignment––For a client that has roamed from one UNIVERGE
WL Controller to another, VLAN is the one assigned to the user on the
UNIVERGE WL Controller where the user first accessed the network.
(This is the UNIVERGE WL Controller where the client’s global
session in the Mobility Domain started.)
This authorization source (initial-assignment) is displayed only if the
following conditions are true:
• The client roamed from another UNIVERGE WL Controller.
• The service profile for the SSID the user is on is configured to keep
the client’s initial VLAN assignment. (This means the
keep-initial-vlan option is enabled on the service profile.)
• The VLAN is not configured for the user on the roamed-to switch
by the local database.
• A Location Policy on the roamed-to UNIVERGE WL Controller
does not set the VLAN.
• location policy––Attribute value was assigned by a Location Policy.
• service-profile––Attribute value is configured on the SSID, and was
not overridden by other attribute sources (such as AAA or location
policy).
• Web Portal––Session is for a Web Portal client.
Table 66. show sessions network session-id Output
Field Description
Local Id Identifier for the session on this particular UNIVERGE WL
Controller. (This is the session ID you specify when entering the
show sessions network session-id command.)
Global Id Unique session identifier within the Mobility Domain.
Table 65. Additional show sessions network verbose
Output
Field Description