Specifications

show sessions network
Chapter 18
Session Management Commands
544
State Status of the session:
• AUTH, ASSOC REQ—Client is being associated by the
802.1X protocol.
• AUTH AND ASSOC—Client is being associated by the 802.1X
protocol, and the user is being authenticated.
• AUTHORIZING—User has been authenticated (for example,
by the 802.1X protocol and an AAA method), and is entering
AAA authorization.
• AUTHORIZED—User has been authorized by an AAA
method.
• ACTIVE—User’s AAA attributes have been applied, and the
user is active on the network.
• DEASSOCIATED—One of the following:
• Wireless client has sent the UNIVERGE WL Controller a
disassociate message.
• User associated with one of the current UNIVERGE WL
Controllers AP has appeared at another UNIVERGE WL
Controller in the Mobility Domain.
• ROAMING AWAY—The UNIVERGE WL Controller has been
sent a request to transfer the user, who is roaming, to another
UNIVERGE WL Controller.
• STATUS UPDATED—UNIVERGE WL Controller is receiving
a final update from an AP about the user, who has roamed away.
• WEB_AUTHING—User is being authenticated by WebAAA.
• KILLING—User’s session is being cleared, because of 802.1X
authentication failure, entry of a clear command, or some other
event.
SSID Name of the SSID the user is on.
Port/Radio AP number and radio through which the user is accessing this
session.
MAC address MAC address of the session user.
User Name Name of the authenticated user of this session
IP Address IP address of the session user.
Vlan Name Name of the VLAN associated with the session.
Table 66. show sessions network session-id Output
Field Description