Specifications

show rfdetect mobility-domain
Chapter 19
RF Detection Commands
570
Switch-IPaddress: 10.3.8.103 Port/Radio/Ch: ap 1/1/1 Mac: 00:0b:0e:76:56:82
Device-type: interfering Adhoc: no Crypto-types: clear
RSSI: -76 SSID: webaaa
Two types of information are shown. The lines that are not indented show the
BSSID, vendor, and information about the SSID. The indented lines that follow
this information indicate the listeners (UNIVERGE WL Access Points radios) that
detected the SSID. Each set of indented lines is for a separate UNIVERGE WL
Access Points listener.
In this example, two BSSIDs are mapped to the SSID. Separate sets of
information are shown for each of the BSSIDs, and information about the listeners
for each BSSID is shown.
The following command displays detailed information for a BSSID.
PROPMT# show rfdetect mobility-domain bssid 00:0b:0e:00:04:d1
BSSID: 00:0b:0e:00:04:d1 Vendor: Cisco SSID: notmycorp
Type: rogue Adhoc: no Crypto-types: clear
Switch-IPaddress: 10.8.121.102 Port/Radio/Ch: 3/2/56 Mac: 00:0b:0e:00:0a:6b
Device-type: rogue Adhoc: no Crypto-types: clear
RSSI: -72 SSID: notmycorp
Switch-IPaddress: 10.3.8.103 Port/Radio/Ch: ap 1/1/157 Mac: 00:0b:0e:76:56:82
Device-type: rogue Adhoc: no Crypto-types: clear
RSSI: -72 SSID: notmycorp