Manualshelf

Specifications

ManualsBrandsSimplicity ManualsSewing MachineSA2200
591592593594595596597598599600
restore
Chapter 20
File Management Commands
592
restore
Unzips a system archive created by the backup command and copies the files
from the archive onto the UNIVERGE WL Controller.
Syntax
restore system [tftp:/ip-addr/]filename [all | critical] [force]
Defaults
The default is critical.
Access
Enabled.
[tftp:/ip-addr/]filename Name of the archive file to load. The archive
can be located in the UNIVERGE WL
Controllers nonvolatile storage or on a TFTP
server.
all Restores system files and the user files from
the archive.
critical Restores system files only, including the
configuration file used when booting, and
certificate files.
force Replaces files on the UNIVERGE WL
Controller with those in the archive, even if the
UNIVERGE WL Controller is not the same as
the one from which the archive was created.
CAUTION! Do not use this option unless
advised to do so by UNIVERGE. If you restore
one UNIVERGE WL Controllers system files
onto another UNIVERGE WL Controller, you
must generate new key pairs and certificates on
the UNIVERGE WL Controller.