Specifications

set trace authorization
Chapter 21
Trace Commands
608
Syntax set trace authentication [mac-addr mac-address] [port port-num]
[user username] [level level]
Defaults The default trace level is 5.
Access Enabled.
Examples The following command starts a trace for information about user jose’s
authentication:
PROMPT# set trace authentication user jose
success: change accepted.
See Also
l clear trace on page 606
l show trace on page 611
set trace authorization
Traces authorization information.
mac-addr mac-address Traces a MAC address. Specify a MAC address,
using colons to separate the octets (for example,
00:11:22:aa:bb:cc).
port port-num Traces a port number.
user username Traces a user. Specify a username of up to
32 alphanumeric characters with no spaces.
level level Determines the quantity of information included in
the output. You can set the level with an integer
from 1 to 10, where level 10 provides the most
information. Levels 1 through 5 provide
user-readable information. If you do not specify a
level, level 5 is the default.