Specifications

show snoop
Chapter 22
Snoop Commands
620
Access Enabled.
Usage The filter mode is retained even if you disable and reenable the radio, or
restart the UNIVERGE WL Access Points or the UNIVERGE WL Controller.
Once the filter is enabled, you must use the disable option to disable it.
Examples The following command enables snoop filter snoop1:
PROPMT# set snoop snoop1 mode enable
success: filter 'snoop1' enabled
See Also
l show snoop on page 620
l show snoop info on page 621
l show snoop map on page 621
l show snoop stats on page 622
show snoop
Displays the UNIVERGE WL Access Points radio mapping for all snoop filters.
Syntax show snoop
Defaults None.
Access Enabled.
Usage To display the mappings for a specific UNIVERGE WL Access Points
radio, use the show snoop map command.
Examples The following command shows the UNIVERGE WL Access Points
radio mappings for all snoop filters configured on a UNIVERGE WL Controller:
PROPMT# show snoop
AP: 3 Radio: 2
snoop1
snoop2
AP: 2 Radio: 2
snoop2
See Also
l clear snoop map on page 614