Specifications

show snoop stats
Chapter 22
Snoop Commands
622
Defaults None.
Access Enabled.
Usage To display the mappings for all snoop filters, use the show snoop
command.
Examples The following command shows the mapping for snoop filter snoop1:
PROPMT# show snoop map snoop1
filter 'snoop1' mapping
AP: 3 Radio: 2
See Also
l clear snoop map on page 614
l set snoop map on page 618
l show snoop on page 620
show snoop stats
Displays statistics for enabled snoop filters.
Examples show snoop stats [filter-name ap [ap-num [radio {1 | 2}]]]
Defaults None.
Access Enabled.
Usage The UNIVERGE WL Access Points retains statistics for a snoop filter
until the filter is changed or disabled. The UNIVERGE WL Access Points then
clears the statistics.
filter-name Name of the snoop filter.
ap ap-num Number of a UNIVERGE WL Access Points to which the
snoop filter is mapped.
radio 1 Radio 1 of the UNIVERGE WL Access Points.
radio 2 Radio 2 of the UNIVERGE WL Access Points. (This option
does not apply to single-radio models.)