Specifications

show port status
Chapter 5
Port Commands
63
Port Status Rx Octets Tx Octets
=================================================================
1 Up 27965420 34886544
This command’s output has the same fields as the monitor port counters
command. For descriptions of the fields, see Table 4 on page 50.
See Also
l clear port counters on page 46
l monitor port counters on page 47
show port status
Displays configuration and status information for ports.
Syntax show port status [port-list]
Defaults None.
Access All.
Examples The following command displays information for ports:
PROMPT# show port status
Port Name Admin Oper Config Actual Type Media
======================================================================
1 1 up up auto 100/full network 10/100BaseTx
Table 6 describes the fields in this display.
port-list List of physical ports. If you do not specify a port list,
information is displayed for all ports.
Table 6. Output for show port status
Field Description
Port Port number.
Name Port name. If the port does not have a name, the port
number is listed.