Specifications

clear vlan
Chapter 6
VLAN Commands
69
Defaults If you do not specify a VLAN or all, counters for all VLANs are
cleared.
Access Enabled.
Usage To clear MAC addresses from the list of addresses that clients are allowed
to send data, use the clear security l2-restrict command instead.
Examples The following command clears Layer 2 forwarding restriction statistics
for VLAN abc_air:
PROMPT# clear security l2-restrict counters vlan abc_air
success: change accepted.
See Also
l clear security l2-restrict on page 67
l set security l2-restrict on page 73
l show security l2-restrict on page 84
clear vlan
Removes physical or virtual ports from a VLAN or removes a VLAN entirely.
Syntax clear vlan vlan-id [port port-list [tag tag-value]]
Caution! When you remove a VLAN, UNIVERGE WL Control System
completely removes the VLAN from the configuration and also removes all
configuration information that uses the VLAN. If you want to remove only a
specific port from the VLAN, make sure you specify the port number in the
command.
vlan-id VLAN name or number.