Specifications

show qos dscp-table
Chapter 7
Quality of Service Commands
93
Examples The following command displays the default QoS settings:
PROPMT# show qos default
Ingress QoS Classification Map (dscp-to-cos)
Ingress DSCP CoS Level
=================================================================
00-09 00000 00011
10-19 11111 12222
20-29 22223 33333
30-39 33444 44444
40-49 55555 55566
50-59 66666 67777
60-63 7 7 7 7
Egress QoS Marking Map (cos-to-dscp)
CoS Level 01234567
====================================================================
Egress DSCP 0 8 16 24 32 40 48 56
Egress ToS byte 0x00 0x20 0x40 0x60 0x80 0xA0 0xC0 0xE0
See Also show qos dscp-table on page 93
show qos dscp-table
Displays a table that maps Differentiated Services Code Point (DSCP) values to
their equivalent combinations of IP precedence values and IP ToS values.
Syntax show qos dscp-table
Defaults None.
Access Enabled.
Examples The following command displays the table:
PROPMT# show qos dscp-table
DSCP TOS precedence tos
dec hex dec hex
--------------------------------------------------
0 0x00 0 0x00 0 0
1 0x01 4 0x04 0 2
2 0x02 8 0x08 0 4
...
63 0x3f 252 0xfc 7 14