Description of the vacuum (The chances are you’re never going to read me) Owner’s Manual models SCRS SCRD SCRP www.simplicityvac.
Contents MPORTANT SAFETY INSTRUCTIONS ................................................................ Polarization instructions .................................................................................... Description of the vacuum ................................................................................ Before using your Synchrony the first time ........................................................ 2 3 4 6 Operation Unwinding the power cord ............................................
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE he manufacturer cannot accept responsibility for damage WARNING: Tcaused when the appliance is not used according to the instructions, or for uses other than those for which it was intended. To reduce the risk of fire, electric shock or injury: • Do not leave appliance when plugged in.
Polarization Instructions POWER CORD, 2-WIRE POLARIZED CORD Household models SCRS, SCRD and SCRP To reduce the risk of electric shock, this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
Description of the vacuum 1 2 3 13 4 6 15 5 17 16 7 18 22 19 8 14 21 20 11 12 9 10
Description of the vacuum 1 ComfortGrip™ handle 2 Main on / off power switch 3 Carpet / bare floor switch 4 Power cord 5 ReadyReach™ tools (for models SCRP & SCRD) 6 Carrying handle 7 Bag compartment latch (to replace vacuum bag) 8 Vacuum nozzle 9 Twin Xenon headlamps 10 Furniture guard 11 Brushroll jam indicator 12 Full bag / clog indicator 13 Quick release cord hook 14 Telescopic wand (for models SCRP & SCRD) 15 5-to-1 stretch hose (for models SCRP & SCRD) 16 Tool activat
Before using your Synchrony for the first time Attaching the handle to the vacuum • Remove the handle screw located on the back of the vacuum. Insert the handle downward into the body of the vacuum. Insert screw and tighten. • Open bag compartment lid to ensure vacuum bag is in place. • Your vacuum is now ready for use.
Operation Unwinding the power cord • The upper cord hook rotates to allow for quick access to the power cord.
Operation Vacuuming carpet Brushroll auto shut-off feature • For carpet cleaning, press the “on / off” Note: When the Synchrony is turned on switch on and press the “carpet” switch and in the upright position, the brushroll on. Both lights should be lit. will not spin as to eliminate the possibility of damage to floor surfaces. The brushroll will spin when the handle is lowered, provided Vacuuming hard surfaces the “carpet” switch is on. • For bare floor cleaning (i.e.
Operation Carpet height adjustment There are various carpet height settings available designed for numerous flooring surfaces. • Locate the height adjustment dial just above the right rear wheel, and rotate the dial to the desired height.
Operation Vacuuming under furniture Your Simplicity Synchrony will lay flat on the floor for effective cleaning under beds and tables. • Press the foot pedal release once for normal vacuum cleaning. • Press the foot pedal release a second time to enable the vacuum to lay flat on the floor.
Operation Carrying the vacuum To safely transport your vacuum, especially when carrying the vacuum up and down stairs, use the ergonomic carry handle.
Attachment Cleaning Wand cleaning (on models SCRP & SCRD) With the on-board cleaning tools and vacuum wand, your Simplicity Synchrony becomes a comprehensive cleaning system. Included with the SCRP and SCRD models is an upholstery tool, dusting brush, crevice tool, extension wand and a 5-to-1 stretch hose. • To use the cleaning tools, lift the wand straight up from the vacuum. Turn the tool activation dial to the “on” position. The cleaning wand is now activated for quick cleaning.
Attachment Cleaning Cleaning tools (on models SCRP & SCRD) Your vacuum is equipped with a dusting brush, upholstery brush and crevice tool. Other tools are available at your Authorized Simplicity Retailer. • Remove the cleaning wand from the vacuum and turn the tool activation dial to the “on” position. (See page 12) • Insert any of the tools onto the end of the wand. D usting brush: Ideal for table tops, shelves, blinds or hard surface floors.
Attachment Cleaning Cleaning tools continued… Cleaning tools can also be attached to the curved handle for above-floor cleaning. • Disconnect the wand from the curved handle by pressing the release button. • Attach any of the cleaning tools directly to the curved handle.
Attachment Cleaning Adjusting the suction power for tool cleaning Full suction power might be too strong for some cleaning situations. For example, reduced suction power would be appropriate for cleaning sheer curtains. • On the curved handle, locate the suction relief valve and slide it backward. This reduces the suction power coming through the tool. Slide the valve forward when finished to restore full suction power.
Attachment Cleaning Optional premium attachment kit A premium attachment kit is available through your Authorized Retailer. With numerous high quality accessories for your Synchrony, the kit is a safe and effective way to clean your stairs and a variety of other surfaces. • Remember to activate tool use, you must turn the tool activation dial to the “on” position. Disconnecting the hose for attachment cleaning.
17
Maintenance and Care When to change the vacuum bag The full bag indicator light is designed to show when the bag is full or when there is a clog in the vacuum. Brushroll The system measures airflow and alerts the Full Bag user when airflow is significantly reduced— most commonly from full bags and clogs. The light could also come on when vacuuming fine powders such as flour or Yellow Warning Light drywall dust.
Maintenance and Care Replacing the vacuum bag • Open the bag compartment lid. • Remove vacuum bag by pressing the bag tab. • To insert a new bag, place the base of the bag collar on the bag supports. Then secure the top of the bag collar with the bag tab. • Tuck the bag corners into the vacuum before replacing the bag compartment lid. • Replace lid and press onto vacuum until it snaps into place.
Maintenance and Care When to change filters At minimum, it’s recommended to replace the filters after using twelve vacuum bags. If someone in your household is highly sensitive to airborne allergens, it is recommended to change the filter set after every six vacuum bags. Replacing the post filter Note: Your vacuum is equipped with either an S-Class HEPA filter or an electrostatic filter. To change either type of filter, follow the instructions below.
Maintenance and Care Replacing the secondary filter • Open the bag compartment lid and locate the secondary filter on the left side of the bag compartment. • Pull the front tab away from the vacuum to remove the filter holder. • Remove and throw away the used filter. • Insert the new filter. Then reposition the filter holder back end first and snap into place behind the tab. • Close the bag compartment lid.
Maintenance and Care LIfetime belt protection warranty Your vacuum belt is covered with a lifetime warranty. Should the vacuum belt break, simply bring your vacuum or the broken belt to your Authorized Simplicity Retailer for a free replacement. Annual checkup reminder To keep your vacuum in peak operating condition, it is recommended you bring your Synchrony to your Authorized Simplicity Retailer for an annual checkup.
Problem Solving Guide Full bag or clog indicator light The full bag indicator light is designed to show when the bag is full or when there is a clog in the vacuum. The system measures airflow and alerts the user when airflow is significantly reduced— most commonly from full bags and clogs. The light could also come on when vacuuming fine powders such as flour or Yellow Warning Light drywall dust.
Problem Solving Guide Thermal motor protection Your Synchrony is equipped with a safeguard to recognize when the vacuum heats up and shuts down to protect your vacuum cleaner. Note that when this happens, the headlamps are still on but the motors shut off. Common reasons why a vacuum may overheat include operating a Thermal Reset 1. Unplug machine 3. C orrect problem 2. L ocate problem 4.
Problem Solving Guide Trouble Shooting PROBLEM POSSIBLE REASON POSSIBLE SOLUTION Vacuum won’t turn on • Power cord not firmly plugged in • Blown fuse or tripped breaker • Plug unit in firmly • Needs service Vacuum won’t pick up or low suction • “Carpet” switch not on • Vacuum bag full • Clogged filter • Hose clogged • Worn brushroll • Broken belt Dust escaping from vacuum • Check house fuse or breaker. Replace fuse / reset breaker.
Warranty What is Covered: This warranty covers any defects in material and workmanship in your new Simplicity Synchrony vacuum. How Long Coverage Lasts: Warranty coverage for your Simplicity vacuum lasts five years for household use. What is Not Covered: • Damage to the vacuum which occurs from neglect, abuse, alterations, accident, misuse or improper maintenance. • Normal replacement items: disposable bags, disposable filters, light bulbs and agitator brushes.
Owner’s Warranty Information keep this for your records… Date of purchase Serial number Model number Purchased from: Store name Address City, State, Zip Telephone 27
Notes
Notes
www.simplicityvac.
