Instruction manual

S
E
R
G
E
R
S
E
T
U
P
13
Left Needle
Looper Thread Fine-Tuning Screw
B
Needle
Threader
selector
Needle Threader
lever
No adjustments are needed when sewing with most fabrics and
threads on your Baby Lock Imagine Wave, but certain threads or
fabrics may require minor fine-tuning of the looper delivery system
to perfect your stitches. Increase or decrease the delivery of the
looper threads with the upper and lower looper thread fine-tuning
screw. With a screwdriver (found in accessory kit), turn the fine-tun-
ing screw clockwise to tighten the looper threads equally. Turn the
screw counter-clockwise to loosen the looper threads equally.
Ideal Stitch
Looper threads are
too loose.
Looper threads are
too tight.
Standard Position
Tighten the screw ( + )
Loosen the screw ( - )
1. Turn the handwheel to line up the green marks on the machine and handwheel. Set the needle
threader selector on "L" for left needle.
2. Place the thread on the far-left spool pin on the thread stand (fig.A page 12). Thread needle thread
guides A and B, through the groove on the face plate and through guides C, D, E, F and G.
3. Lower the presser foot and thread the left needle as in steps 4 and 5, under "Right Needle" on page
12.